ADC121C021CIMK/NOPB is a 12-bit Analog to Digital Converter (ADC) from Texas Instruments. It is a single-ended, successive approximation register (SAR) architecture with a conversion speed of up to 200 kilo-samples per second (ksps).

The UCC28712DR is made by Texas Instrument, a primary-side regulated flyback controller for high-density AC/DC power supplies. This integrated circuit (IC) is designed to work with both isolated and non-isolated AC/DC power sources, making it suitable for use in a wide range of applications.

The TPS2492PWR is easy-to-use, positive high voltage, 14-pin Hot Swap Controllers that safely drive an external N-channel FET to control load current. The programmable power foldback protection ensures that the external FET operates inside its safe operating area (SOA) during overload conditions by controlling of power dissipation. The programmable current limit and fault timer ensure the supply, external FET, and load are not harmed by overcurrent. Features include inrush current limiting, controlled load turn-on, interfacing to down-stream DC-to-DC converters, and power feed protection.

The TPD6E004 is a low-capacitance ±15-kV ESD-protection diode array made by Texas Instruments, designed to protect sensitive electronics attached to communication lines. Each channel consists of a pair of diodes that steers ESD current pulses to VCC or GND. The TPD6E004 protects against ESD pulses up to ±15-kV Human-Body Model (HBM), ±8-kV Contact Discharge, and ±12-kV Air-Gap Discharge, as specified in IEC 61000-4-2.

The PMIC TLC7725QPWR is a component manufactured by Texas Instruments. It is a low-power voltage supervisor designed to monitor power supplies and reset microcontrollers and other digital devices when necessary. The device has several features, including an adjustable time delay, a reset input, and a manual reset option. It is commonly used in applications that require reliable power supply monitoring, such as automotive systems, industrial controls, and battery-powered devices.

Made by Texas Instruments, the TL4051 series of shunt voltage references are versatile easy-to-use references suitable for a wide array of applications. The device is available in a fixed 1.225-V output or an adjustable output whose voltage is determined by an external resistor divider. The device requires no external capacitors for operation and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures.